How To Clean Carpets With Baking Soda & Vinegar [The Right Way]

How to Get Baking Soda Out of Carpet – Method # 1

  1. Using a clean mixing bowl, mix together 3 parts warm water with 1 part white vinegar.
  2. Soak a clean sponge in this solution and apply the sponge directly to the baking soda stain.
  3. Place pressure on the affected area with a dry towel.
  4. Repeat steps # 1-3 until the baking soda stain disappears.
  5. Let the affected area dry naturally.

Up to 50% off residential cleaning services – find discounts in your area!

Video

Greasy Stain Removal

Not all stains are going to be simple for you to clean up. If there is any grease in the stain, you will need to take a different approach to help remove it. Try these four steps:

  1. To start, use a rag or paper towel to blot the stain, removing as much of the grease as possible. Be careful not to rub the grease; this will cause it to set in the carpet and can damage the carpet fibers.
  2. After you have thoroughly blotted, sprinkle dry baking soda on the stain and allow it to sit overnight. The longer that you allow it to sit, the more grease it will be able to absorb.
  3. In the morning, you will want to vacuum the area thoroughly. If you can’t see the stain anymore, you’re all done! If the stain is still visible, take a little dish soap (about the size of a dime to start) and begin to blot it into the stain to help cut through the grease.
    • Immediately follow with water and a towel to start blotting up the soapy residue. Always remember to blot so you don’t spread the grease or cause any damage to the carpet fibers.
  4. Finally, dry the area until it is slightly damp. Sprinkle another layer of baking soda onto the stain and allow it to sit for at least three hours before vacuuming the area again.

Is the grease stain still not coming out? Try these other methods of grease removal from HowStuffWorks, or give Clean Choice a call to schedule professional carpet cleaning in Maryland!

Baking Soda Reacts with Vinegar

Vinegar is undoubtedly an incredible weapon when it comes to fighting carpet smells and stains, and baking soda significantly reacts with the ingredients present in vinegar.

Baking soda and vinegar are like partners in crime, and together, they can do wonders in terms of removing dirty stains and unpleasant odors from carpets. Carpet cleaning with vinegar and baking soda is a simple but effective solution.

Cleaning a carpet with vinegar and baking soda is the best way to keep your carpet looking fresh and clean. The ideal method is to soak the affected areas with vinegar and then sprinkle some baking soda on top.

This process will result in a bubbling mixture as the baking soda reacts with the vinegar. Allow the mixture to absorb the stain for a few minutes. Then, you can wipe it and vacuum it up.

Pet Odor Treatment

Baking soda can be effective in helping eliminate minor pet odor treatment. The good news is that baking soda is inexpensive and is an easy thing to try on a pet stain before calling the pros. You aren’t going to damage the carpet or set the stain in such a way that a professional can’t then remove it. So give this method a try and see if it works before you call the pros.

Pet stain carpet cleaning with vinegar and baking soda

  • The first step to cleaning up a recent pet urine stain is to remove as much urine as you can with an old towel (that you can then throw in the wash) or a stack of paper towels. Attempt to blot as much as you can. If this is a dried stain, ignore the first step.
  • Next mix an equal part white vinegar and baking soda to create a watery paste.
  • Apply the paste liberally to the carpet and then use a sponge to remove as much as possible.
  • If you have a wet/dry vac, use it to remove as much of the solution as you can.
  • Wait for the area to dry and then vacuum it.

There are plenty of resources online stating the baking soda and vinegar is a magic cure-all to remove pet urine and pet odor. Unfortunately, this is not entirely accurate. Usually this only works for minor pet urine carpet stain issues.

For more significant pet odor problems, you’ll need to call a professional for help removing the urine and odor from carpet. If you’re still curious as to why pet odor can be so hard to remove, this article explain removing dog urine from carpet in depth.

Removing general pet odors

Baking soda works great for general pet odor deodorizing. For example, if your car smells like your dog, sprinkle some baking soda onto the carpet and upholstery and allow it to sit for 20 minutes before vacuuming it up. This can work in the living room or on your pet’s bed as well.

Can Baking Soda Damage Carpet?

Baking soda won’t damage your carpet, but it may damage the underlay or the floors beneath. It may also be super difficult to vacuum every bit of baking soda from the carpet afterwards.

The baking soda particles are so small that they can often find their way underneath the carpet fibers. This isn’t a massive issue, and since baking soda is safe for humans and pets, it’s not the end of the world if you don’t manage to vacuum every last bit of baking soda up.

Does Baking Soda Discolor Carpet?

No — baking soda won’t cause discoloration or fading. If anything, it will make carpets look brighter and fresher.

Alternative Cleaning Solutions That Can Be Used Safely on Your Carpet

Professional Solutions

  • We suggest you look at products recommended by the Carpet & Rug Institute. They have a list of over 300 products that you can choose from based on your needs.
  • Your carpets should be professionally cleaned every 12 to 18 months.

DIY Solutions Most simple: use lukewarm tap water for spills you catch right awayMix 1/4 teaspoon of dish washing detergent with 1 cup of lukewarm waterMix 1 cup white vinegar with 2 cups of of waterMix 1 tablespoon ammonia with 1 cup of water In all cases, it is always a good idea to spot test a hidden area to ensure the cleaning solution does not cause discoloration to the carpet. In addition, always read your carpet manufacturer’s warranty.

Back To Top

Homemade Carpet Freshener

You can whip up your own homemade baking soda carpet freshener to clean your carpets.

If you have pets in your home, this will come in extremely handy considering how house pets can sometimes leave your carpets smelling unpleasant. A good freshening powder can do an excellent job at removing pet odor.

For the perfect baking soda carpet cleaner recipe, all you need is a little baking soda with dried rosemary or lavender. You can also use any other dried herb that you may have lying around in your kitchen pantry.

First, mix baking soda with any powdered dried herb in a bowl. Sprinkle it all over the carpet and then thoroughly vacuum the entire area.

If you don’t own a vacuum cleaner, you can either scrape it off with a brush or use a portable carpet cleaner if you have one.

Can I Vacuum Baking Soda with My Dyson?

It depends on the filter. The issue with vacuuming baking soda is that not every vacuum cleaner prevents fine particles, like baking soda, from getting through to the motor.

If baking soda gets into the motor, it can break the Dyson vacuum. Unfortunately, this has happened with some Dyson customers.

You should read your manufacturer’s instructions to see what they say about fine particles and carpet cleaners. Generally, bagged vacuums are best for fine particles.

Removing Non-Greasy Stains with Just Baking Soda

  If you’re dealing with a non-greasy stain, you should have a slightly easier time getting it up. Non-greasy stains are caused by things like tea, soda, wine, ink, and anything else that is colorful or dark, but without any oily or fatty residue. Because there’s no underlying residue in these stains, the baking soda only has to absorb the color causing the stain.

You’ll just need to use the following steps to remove your non-greasy stain with baking soda:

  1. First, sprinkle the top of the stain with the baking soda. Make sure it is completely covered and that it isn’t too thin.
  2. Next, you’ll need to wet the baking soda with cold water (never use heat because it could make the stain more difficult to remove), but don’t use too much or you could spread the stain. Using a spray bottle to mist the area is a good tactic because you just need the baking soda to be damp.
  3. Allow the baking soda to sit overnight – again, you shouldn’t rush this process because the longer you allow it to sit, the more it will be able to absorb.
  4. Finally, you should vacuum the area and check the stain.

Completing these steps should take care of most stains, but you may find that you need to repeat the process if the stain is stubborn.

Removing Stains with Vinegar and Baking Soda

Baking soda has great absorbing properties while vinegar is known for removing even the hardest stains of fabric due to its tough acetic acid. Combining the two is truly hard to beat. Here is how to create the mixture.

Tools:

  • Paper towels
  • Vacuum
  • Bucket/spray bottle

Ingredients:

  • Vinegar
  • Water
  • Baking soda

Procedures:

  1. Blot the stain dry by using a paper towel. Just a gentle blot, don’t rub. Rubbing can only spread the stains more. Add more paper towels if needed. Make sure the spot is completely dry.
  2. Get a bucket or an empty spray bottle and mix water and vinegar together. These two should be in equal parts. So, when you use 2 cups of water, use 2 cups of vinegar as well. Soak the stained area with this solution. This will cut through stubborn stains and neutralise the smell making the dirt easy to remove.
  3. Scrub the beast stain the hard way. Carpet is composed of the thick fabric layer. You cannot remove the dirt if you just scrub it lightly. Scrub hard but not too much like causing the fibers to damage. For super bad smells and stains. Use 100% vinegar solution as vinegar alone is more powerful.
  4. This time, pour the baking soda. Do this while the area is still wet. Add a little vinegar then. Just vinegar, something not vinegar and water mixture. You will see fizzing and cackling afterwards which means the cleaning starts to work. Gently rub the baking soda deep down the carpet fibres for all-out cleanliness.
  5. Leave the baking soda on the carpet overnight. Sometimes it would take a day or two. Let it dry completely. Vacuum the baking soda right away. Your carpet will look really good after this.

Tips:

For hard to get urine or stains, you may call a professional carpet cleaner for they use extensive water extraction methods suitable for tougher stains.

Knowing how to clean carpet with vinegar and baking soda is just easy with this recipe. All you need to do is to take a small amount of vinegar and baking soda solution and pour it over the affected area of the carpet. Wait a few hours for it to dry. Do a little brushing then you are good to go.

Final Thoughts on Cleaning with Baking Soda and Vinegar

  If you’re looking for a natural and inexpensive way to clean stains and odors from your carpets, then you can’t go wrong with baking soda or vinegar. Its natural absorbing properties make baking soda perfect removing stains and smells, and the natural disinfectant nature of vinegar means you can be sure the area is completely clean. Just remember that you need to allow the baking soda or mixture plenty of time to work its magic before you vacuum it up, and you should have a clean, fresh carpet at the end.

However, if you’re faced with an extremely large stain, or you have a stain that just won’t come out even after repeated applications of baking soda, then you may still need to hire a professional cleaning service. They’ll have specialty equipment which can get the job done more thoroughly and quickly.

GET UPDATES GET UPDATES No spam, we promise.

Tags