Full Guide on How to Fix Android Phone or Tablet Won’t Turn On

Part 1. What Is a Bricked Phone: Soft Brick or Hard Brick?

When people say a phone is bricked, it can mean that the phone won’t boot properly and turns into a totally useless brick, which is called a hard brick. Actually, there are two types of bricking: soft brick and hard brick.

# Soft Brick

Although the phone won’t turn on properly, you can still see something after the phone boots up. In this way, your phone is soft-bricked and you can unbrick it in the correct way. The followings are the common symptoms of a soft-bricked Android phone:

# Hard Brick

If it is a hard brick, the phone won’t turn on in any way or any form. You keep pressing the power button, but nothing happens. It seems like the phone is really dead. A hard brick rarely happens, but if unfortunately, it does, it leaves you no option but turns to repair service or go straight to your carrier’s/manufacture’s store.

In nine cases out of ten, the bricked phone is exp

In nine cases out of ten, the bricked phone is experiencing a soft brick, which is fixable with software methods. This is exactly what we provide here that will be effective for soft-bricked Android devices.

Video

Part 3: Get Photos off Android Phone that Won’t Turn on with Google Drive

To recover data from phone that won’t turn on in this way, make sure both of the scenarios below are facing you:

How to recover data from a phone that won’t turn on via Google Drive?

  • Install and open Google Drive on your computer.
  • Log in to the account you used on your broken phone.
  • View and select the photos you wish to restore.
  • Click Download to get photos off the Drive.

Posts You Might Also Like:

Posts You Might Also Like:

What to do if my Samsung Galaxy Can Be Recognized by My Computer but Does Not Power On?

When your Samsung Galaxy does not Power on, but when you connect it to your computer, your system can recognize it, then you can try to reinstate the Android operating system. It may have gone corrupt for some reason, or if it is powered off because you were trying to tweak the system software or if you tried to change something in the custom ROM. Google provides firmware images that can be easily installed on your computer can read your Samsung Galaxy phone.

Do this if you understand firmware and installation of software on the phone through the computer. If any of this is too difficult for you, leave it to a professional.

Case 4. Your Charger or Cable Got Damaged

Especially while traveling, if you are not careful enough, you will end-up causing damage to your charging cable and to your charger. When that happens, your phone will not charge and it will not turn on either as it simply does not have any power left on it.

If you are facing a similar issue, you may try cha

If you are facing a similar issue, you may try changing your charging cable and the whole charger to see if that helps resolve your Android tablet wont turn on issue. It should likely fix the issue if the cable is the culprit.

Part 3: Useful Tips to avoid Bricking your Android Phone

If you are planning on installing custom ROM you need to install Custom Recovery. This will enable you restore the device to its original settings should anything go wrong and hopefully help you avoid bricking your device.

  1. Ensure that you are familiar with the Fastboot or ADB commands before doing anything. You should know how to recover your device by flashing a command line and also manually transfer important files to your device.
  2. Make a backup of your device. This is obvious but most people fail to adhere to it. At the very least you can get back all your files and settings to transfer to a new phone.
  3. Keep a full Nandroid backup on your phone
  4. Keep another backup on your PC which you can access should anything go wrong with the Custom ROM installation
  5. Know how to hard reset your device. It may come in handy when your device freezes on you.
  6. You should also consider enabling USB debugging. This is because many solutions for a Bricked device rely on USB debugging.
  7. Ensure the Custom ROM you choose can actually be used on your device model.

While installing Custom ROM can actually be a great way to customize your device, it is also the leading reason for bricked devices. Therefore ensure that you understand what you are doing when you decide to customize your device. Learn as much as you can about the process before attempting everything.

Part 2. Why do Android Phones and Tablets get bricked?

Our mobile devices have become our best buddies in everyday situations so screwing up your phone is the last thing you would want to do. There are numerous reasons why devices get bricked and we need to be familiar with them in order to understand the possible ways to fix bricked Android phones:

  • Software Update Interruptions – An Android software update is very critical to your phone’s health. Once the ongoing update is interrupted, it imposes a great risk and may affect its performance.

The most common interruption is User-error. When you receive the OTA (Over the Air) notification that there is an available update for your Android phone or tablet, avoid using the device for other transactions. Wait until the whole process is complete. You can update your phone or tablet during your free times to avoid update interruptions.

Power failure is another cause of Software Update Interruptions. When you start updating your Android phone and tablet, make sure you have enough battery life or plugged into a charger.

  • Flashing Android ROM (Read Only Memory) – Flashing Android ROM means modifying or copying the system files on the device and in order to do this process, you need to perform an Android Root. Rooting will give you the Administrator privilege to gain access to the main core of your Android operating system. A single incorrect modification or missing codes may cause the device to become bricked. This can either be soft or hard brick.
  • Wrong Firmware – Electronics is mostly about compatibility, one wrong combination will cause something worse. For example, installing an incompatible firmware to a different hardware may also cause Android bricking.
  • Malicious Apps- Installing malicious apps may also cause Android bricking. The most common cause of a soft brick is installing a font application. Other unfamiliar apps can impose threats of bricking as well. Before downloading these apps, check out user reviews, ratings, and developer information.

Avoid the Android bricking by following these tips:

If you are using a rooted Android device that is running on a customized ROM, there is a tendency that your device may become bricked at some serious point. However, you can avoid this issue when you take safety measures. If you do not want to brick up your Android phone or tablet, learn the signs and symptoms that are unlikely and while early, look for possible solutions.

  • If you want to customize your phone experience and wanted to install apps that you really wanted, make sure you are flashing the Android ROM properly and as per white hat instruction to avoid bricking. Also choose the right firmware for your device model before downloading.
  • During software updates, make sure to have at least more than 50% battery life to sustain or until the whole update is complete.
  • When you receive the OTA for a software update, familiarize yourself with the latest version first before you install and download on your phone. Few cases of software updates have caused phone bricking. You may also want to wait until the latest version is on a stable status before updating your device.
  • Choose only the secured apps to be installed on your Android phones and tablets. Some apps have malwares in it that once downloaded; it can affect your phone’s entire system and damage it completely.

Part 2. What we can do for soft brick fix

Soft brick can be solved. You are in the right place. Broken Android Data Extraction is able to help you out, regardless of whichever situations introduced below when Android device is likely to get a soft brick. And in the next part, we will detailedly recommend the perfect Android recovery tool.

#1. Soft-brick while flashing stock ROM

If you ever did something wrong while you was flashing a stock ROM or the device powered off while flashing procedure, the Android phone might get bricked. Sometime the Android mobile phone will be stuck on the boot loop after installing or performing a new ROM.

#2. Soft-brick while rooting Android phone

The instructions about rooting Android phone should be read and obeyed carefully. If there are some wrong operations during the rooting process, your Android phone might get soft-brick. Also, it also caused when some essential programming codes are deleted.

#3. Soft-brick while using apps requiring root access

While you are using an app which requires root access, soft brick might occur. When such app asks your root permission, you may simple grant it. Then the device may turn to be a brick when you reboot your phone.

#4. Soft-brick while installing custom ROM

Custom ROM installment failure can lead to soft brick of Android device. Moreover, your phone get bricked for loose USB connection or poor battery power during installing custom ROM.

#5. Soft-brick while updating Android’s firmware

Sometimes your Android device get bricked when updating firmware. It takes up when your has low battery life or due to network connection issues. You need to make sure the battery power is up to at least 80% before updating firmware of your android device.

#6. Soft-brick while factory data reset

Factory reset of your Android phone might also result in soft brick. Sometimes, your rooted android device might soft-brick after you performing a simple factory reset.

#7. Soft-brick while multi-tasking

Soft brick can occur when you are performing multi-tasking. When you operate multiple tasks at a same time on your Android phone, the device will be heating and then get bricked. Usually this soft-brick issue takes up with inferior Android devices or when you launch more apps in your android.

What to do if your Android wont turn on?

Solution 1: Soft Reset

When you face this problem, the first thing to do is to try and do a soft reset, which should help you restart the phone without getting stuck on the logo screen. A soft reset varies on different devices. While it usually involves holding down the power button for 8 to 10 seconds, certain phones like the HTC One, Samsung Galaxy Tab 3, and Sony Xperia Z3 require holding the Power and the Volume Up button together for 8 to 10 seconds. Depending on the model of your phone, one of these may be successful.

Solution 2: Charge Your Device

There is a possibility that your device powered off because the battery died. Sometimes, the battery indicator may show the battery has 25%, for example, and it is actually almost empty. Switch off your device completely and charge it. Allow your device to charge for some time and then power it on. Check if your device can power on completely, and if it does, then your problem is solved, and you can enjoy using your phone now.

www.cio.com

Solution 3: Use a Different Charging Method

If your phone’s or tablet’s charger is not helping, then try using a USB cable and connect your device to your computer. If you were using a computer to charge the phone, then switch to a wall charger to check if it works. If nothing happens, try charging another device if possible, using the same charger to check if other devices are charging. By doing this, you will figure out if the problem lies within the device or the charger.

Make sure that the charger or the cable is not damaged in any way if you do not have a different device to test whether the charger is working or not. Damaged cables can be why your phone is unable to charge, and if your phone’s battery is dead, then your phone will not switch on.

www.youtube.com

Solution 4: Reinsert the battery or switch batteries

When the phone won’t turn on, it is worth pulling out the device’s battery (if the device has a removable battery), waiting for a few seconds, and then reinserting the battery.

If reinserting the battery didn’t fix the problem, switch batteries. If you have an extra battery with you, check if the phone powers when you switch batteries.

www.ifixit.com

Solution 5: Try Hitting the Power Button – Again

I know you have already tried using the Power button but try it more than two or three times. After you charge the phone, Press the Power button a few times to ensure that there is definitely a problem with powering on the phone. If it Powers on, then check if the Power button is working properly. There may be a problem in how the Power button is wired up, and maybe some loose component is causing the issue. Take the phone to a technician who can check the internal wiring of the phone if the Power button is not working properly.

the-gadgeteer.com

Solution 6: Wipe Cache Partition

Wiping the cache partition of your phone allows you to remove the cache files which may have been corrupted and caused the phone to power off. There is a possibility that the corrupt cache files may not allow your phone to power On. These cache files are temporary in nature and will be created by the phone once again after you wipe out the current cache files. To wipe the cache partition, you need to enter the recovery mode by pressing a specific combination of keys. The combination varies from one Android device to another. Here are some examples:

Samsung: Power button, Volume Down button, Home button.

Nexus: Power button, Volume Down, and Volume Up

LG: Power button and Volume Down button

HTC: Volume down and Power button.

To wipe the cache partition, follow these steps:

  • Press and hold the Power button, the Volume Down button, and the Home button (for Samsung) all at the same time.

  • Once you see the Android icon, release the Power button but continue to press and hold the other two buttons till you see the System Recover screen.

  • You will see a menu with many options. Use the Volume Down key to highlight the option that says ‘Wipe Cache Partition.

  • Select the option by using the Power key, and the process of wiping out the cache partition will initiate.

www.youtube.com

Once it completes, your phone will automatically reboot, and new cache files will be built by your phone. If you can go through the entire process successfully and your phone switches on, your problem is fixed. Still, if your Samsung Galaxy won’t turn on or charge even after wiping the cache partition, then you must consider resetting the phone to factory settings.

Solution No.7: Use The Manufacturer Specific PC Suite

When you encounter this problem, and your phone won’t turn on, it is wise to connect your device to the computer and use the device’s manufacturer-specific PC suite. Smartphones have their own PC suite depending on the phone manufacturer, like Samsung smartphones use Samsung Kies, and LG phones have the LG PC Suite. Similarly, all of the smartphones have a PC suite.

With the help of a PC suite, you can accomplish many things like transferring data, syncing the device with the computer it is connected to, and creating backups. When your Android is stuck on the boot screen, connect it to the computer and then transfer all the data. You can update your phone with the help of the PC suite so that if your phone got stuck during the updates, it would complete the update, and the phone should restart.

This may work if your phone turns on but turns off again after a minute or two.

If nothing seems to work, perform a factory data reset. The steps for this are explained above.

Solution 8: Reset the Phone to Factory Settings

When none of the above solutions can help you, then consider resetting your device to factory settings. When you reset the device to factory settings, you bring your device back to its initial state when it was taken out of the box. This helps wipe all data, and it removes all third-party applications from your device. If any of these were why your phone wouldn’t turn on, then a reset should fix it. Since you will not be able to do the reset from within the device, make sure that you have transferred all the data to your computer to read your device. However, if your computer does not read the device, you lose all the data on your phone. You will have to enter the recovery mode by pressing a specific combination of keys, as we mentioned in the previous solution.

  • Power off your device by pressing the Power key for a long time.
  • Now press and hold the Power, Home, and Volume Down Key (using Samsung).
  • You will notice the Android logo come up on the screen, release the Power button, and continue to press and hold the other two keys until you see the Recovery Menu on your device’s screen.
  • Use the Volume down key to highlight the Factory Reset option in the menu
  • Now with the help of the Power key, confirm your option

Wait till the phone completes the process of resetting itself to factory settings. Once the phone or tablet you are using has been reset, it will automatically restart. If it restarts successfully and reaches the home screen, you should use your phone now.

If you have created a backup, you can restore the backup now and begin using your device.

If the factory reset fails to power on your device and your phone won’t turn on even after a factory reset, or if you are unable to reset your device, then you must consider taking your device to a professional who can check if there is any physical damage on the device which may be causing the problem.

solverbase.com

Part 4 : FAQs of fixing a brick Android phone

What does bricking mean?

Bricking means that a device won’t power on and function normally. Generally, it is not recoverable through normal ways.

What is hard bricked phone?

A hard Brick device generally shows little to no signs of life. It doesn’t respond when you connect it to a charger, or when you press the power button.

Why does a phone get bricked?

It might be caused by some mistakes when you overwrite the firmware or edit the software wrongly.

Will rooting brick my Android phone?

No. Brick mainly happens when you install Custom ROMs which are not compatible with your device.

Tags